Giti Sets an Electric Vehicle Tyres Record at 503 km/h
Giti Tire has won a Guinness World Records title for the highest speed achieved by electric vehicle tyres, after its GitiSport e.GTR2 Pro tyres ran at 503.17 km/h on a closed section of the E11 highway in Abu Dhabi’s Al Dhafra region on 1 November. The run took place in a YANGWANG U9 Xtreme driven by German racing driver Marc Basseng, beating the 496.22 km/h the same combination achieved at ATP Papenburg in Germany in September 2025. Dr Enki Tan, Giti’s executive chairman, received the certificate at a ceremony in Dubai on 6 November.
What was verified
Guinness adjudicates a World Records title rather than accepting self-declaration, which makes this a stronger claim than most performance announcements in this cycle. The speed, the date, the location, the vehicle and the driver all appear, and the prior benchmark carries its own date and venue.
The 503.17 km/h figure works out to 312.65 mph, and the improvement over the previous mark is 6.95 km/h, or about 1.4 per cent. That is a small margin at the edge of what a tyre survives, which is the nature of a record attempt rather than a criticism of it.
Two context points are worth recording. Giti describes itself as having 75 years of tyre manufacturing experience and a presence in more than 130 countries, which places this record in a promotional context as much as an engineering one. And the record class is specifically for electric vehicle tyres, a category that has existed only as long as electric performance cars have, which makes the benchmark younger and less contested than a conventional land-speed record would be.
What the tyre had to survive
The engineering problem at that speed is not grip in the ordinary sense. A tyre rotating at 503 km/h is subject to centrifugal forces trying to pull the tread and carcass apart, and the temperature rise from deformation compounds it. A failure at that speed is not a puncture. It is a structural event.
Giti says it engineered the tyre to withstand the forces generated by an electric hypercar producing more than 3,000 PS, and that it incorporates high-strength aramid fibre reinforcement and a specialised racing profile. It describes more than three years of collaborative development with YANGWANG and Basseng, refining the tyre against vehicle dynamics, aerodynamic changes and driver feedback, and further optimising it for the Abu Dhabi highway’s conditions.
Those are real engineering claims and they are also the entirety of the technical disclosure.
What is missing
No tyre specification appears: no size, no compound, no construction detail, no load index, no inflation pressure and no temperature data from the run. Nothing describes the condition of the tyres after the attempt, which is the figure an engineer would most want, since a tyre surviving 503 km/h once and one surviving it repeatably are different achievements.
The distinction matters because a record for electric vehicle tyres carries a different burden than one for conventional tyres: the load on the carcass is similar, but vehicle mass and torque delivery are not. The release also does not name any of the original equipment partnerships it cites as evidence of engineering standing, and it gives no indication of how the record technology transfers to the passenger tyres in the company’s portfolio beyond an assurance that it does.

What to watch
Whether Giti publishes the tyre specification and the post-run inspection data, because that is the difference between a marketing milestone and an engineering one. Whether Giti attempts the record again, since repeatability is the harder test. And whether the aramid reinforcement and construction approach appear in a production electric vehicle tyre, because that is what would make this relevant to anyone buying an electric vehicle rather than watching one.

